Fedrigoni Nettuno Perla
€91,14
A4 (2 reams)A3 (1 ream)SRA3 (1 ream)cm. 33x48,2 (1 ream)A4 (9 reams)A3 (4 reams)SRA3 (4 reams)
280g (100 sheets per ream)140g (200 sheets per ream)215g (125 sheets per ream)

FEDRIGONI NETTUNO PERLA

 

Nettuno range is made using FSC® Certified, environment-friendly ECF pulp. Uncoated and felt-marked on both sides, and pulp-dyed with light-fast colours. They are ideal for all kinds of publishing, packaging and commercial printing.

Colour: Perla

Available weights (g/m2): 140g, 215g, 280g

Available sizes: A4 (cm. 21x29,7), A3 (cm. 29,7x42), SRA3 (cm. 32x45), cm. 33x48,2

 

Applications of Fedrigoni Nettuno

Nettuno papers   and   boards   are   ideal   for   any   kind   of   publishing, packaging and commercial printing. They are held in high  regard  for  packaging  and  shoppers,  special  publications,  brochures, booklets and coordinated graphic materials.


Printing suggestions

Fedrigoni Nettuno can be used without problems with the main printing systems: letterpress,   offset,   blind   embossing,   hot   foil   stamping,   thermography  and  screen  printing.  The  macro-porous  surface  suggests the use of oxidative drying inks. For hot foil stamping reproductions,  only  for  Black  colour,  in  specific  hygrometric  conditions,  or  using  unsuitable  foils  it  can  arise  problems  like  oxidation  or  speckled  printing,  especially  using  colors  like  Golden,  Silver  or  Metallic.  It  is  recommended  the  consultation  with  your  foil  providers.  In  order  to  give  total  solution  to  this  problem  it  is  necessary  to  isolate  the  film  for  hot  stamping  printing  from  the  paper:    it  can  be  done  either  with  a  plastic  coated surface, a double hot stamping printing (making sure to use a white or transparent film before the printing metal band), or with a printing water-based or solvent varnish.


Converting suggestions

Varnishing and plastic laminating must be assessed in advance. The  varnishing  coated  with  an  offset  machine  is  almost  fully  absorbed  and  therefore  does  not  improve  gloss  or  protection.  Screen-printing  varnishing  achieves  better  results,  although  it  is  often  necessary  to  perform  two  shots  to  achieve  a  distinctly  evident  result.  The  surface  roughness  typical  of  felt  marked  papers  may  give  rise  to  micro  defects  with  plastic  laminating  caused  by  incomplete  adhesion  of  the  film  to  the  substrate.  Good results with major processing operations such as: cutting, die-cutting, scoring, folding and glueing.

 

Fedrigoni Nettuno - Technical Sheet

You can download the technical sheet of the paper Fedrigoni Nettuno by clicking here

Fedrigoni Nettuno Perla
€91,14
A4 (2 reams)A3 (1 ream)SRA3 (1 ream)cm. 33x48,2 (1 ream)A4 (9 reams)A3 (4 reams)SRA3 (4 reams)
280g (100 sheets per ream)140g (200 sheets per ream)215g (125 sheets per ream)

FEDRIGONI NETTUNO PERLA

 

Nettuno range is made using FSC® Certified, environment-friendly ECF pulp. Uncoated and felt-marked on both sides, and pulp-dyed with light-fast colours. They are ideal for all kinds of publishing, packaging and commercial printing.

Colour: Perla

Available weights (g/m2): 140g, 215g, 280g

Available sizes: A4 (cm. 21x29,7), A3 (cm. 29,7x42), SRA3 (cm. 32x45), cm. 33x48,2

 

Applications of Fedrigoni Nettuno

Nettuno papers   and   boards   are   ideal   for   any   kind   of   publishing, packaging and commercial printing. They are held in high  regard  for  packaging  and  shoppers,  special  publications,  brochures, booklets and coordinated graphic materials.


Printing suggestions

Fedrigoni Nettuno can be used without problems with the main printing systems: letterpress,   offset,   blind   embossing,   hot   foil   stamping,   thermography  and  screen  printing.  The  macro-porous  surface  suggests the use of oxidative drying inks. For hot foil stamping reproductions,  only  for  Black  colour,  in  specific  hygrometric  conditions,  or  using  unsuitable  foils  it  can  arise  problems  like  oxidation  or  speckled  printing,  especially  using  colors  like  Golden,  Silver  or  Metallic.  It  is  recommended  the  consultation  with  your  foil  providers.  In  order  to  give  total  solution  to  this  problem  it  is  necessary  to  isolate  the  film  for  hot  stamping  printing  from  the  paper:    it  can  be  done  either  with  a  plastic  coated surface, a double hot stamping printing (making sure to use a white or transparent film before the printing metal band), or with a printing water-based or solvent varnish.


Converting suggestions

Varnishing and plastic laminating must be assessed in advance. The  varnishing  coated  with  an  offset  machine  is  almost  fully  absorbed  and  therefore  does  not  improve  gloss  or  protection.  Screen-printing  varnishing  achieves  better  results,  although  it  is  often  necessary  to  perform  two  shots  to  achieve  a  distinctly  evident  result.  The  surface  roughness  typical  of  felt  marked  papers  may  give  rise  to  micro  defects  with  plastic  laminating  caused  by  incomplete  adhesion  of  the  film  to  the  substrate.  Good results with major processing operations such as: cutting, die-cutting, scoring, folding and glueing.

 

Fedrigoni Nettuno - Technical Sheet

You can download the technical sheet of the paper Fedrigoni Nettuno by clicking here

FEDRIGONI NETTUNO PERLA

 

Nettuno range is made using FSC® Certified, environment-friendly ECF pulp. Uncoated and felt-marked on both sides, and pulp-dyed with light-fast colours. They are ideal for all kinds of publishing, packaging and commercial printing.

Colour: Perla

Available weights (g/m2): 140g, 215g, 280g

Available sizes: A4 (cm. 21x29,7), A3 (cm. 29,7x42), SRA3 (cm. 32x45), cm. 33x48,2

 

Applications of Fedrigoni Nettuno

Nettuno papers   and   boards   are   ideal   for   any   kind   of   publishing, packaging and commercial printing. They are held in high  regard  for  packaging  and  shoppers,  special  publications,  brochures, booklets and coordinated graphic materials.


Printing suggestions

Fedrigoni Nettuno can be used without problems with the main printing systems: letterpress,   offset,   blind   embossing,   hot   foil   stamping,   thermography  and  screen  printing.  The  macro-porous  surface  suggests the use of oxidative drying inks. For hot foil stamping reproductions,  only  for  Black  colour,  in  specific  hygrometric  conditions,  or  using  unsuitable  foils  it  can  arise  problems  like  oxidation  or  speckled  printing,  especially  using  colors  like  Golden,  Silver  or  Metallic.  It  is  recommended  the  consultation  with  your  foil  providers.  In  order  to  give  total  solution  to  this  problem  it  is  necessary  to  isolate  the  film  for  hot  stamping  printing  from  the  paper:    it  can  be  done  either  with  a  plastic  coated surface, a double hot stamping printing (making sure to use a white or transparent film before the printing metal band), or with a printing water-based or solvent varnish.


Converting suggestions

Varnishing and plastic laminating must be assessed in advance. The  varnishing  coated  with  an  offset  machine  is  almost  fully  absorbed  and  therefore  does  not  improve  gloss  or  protection.  Screen-printing  varnishing  achieves  better  results,  although  it  is  often  necessary  to  perform  two  shots  to  achieve  a  distinctly  evident  result.  The  surface  roughness  typical  of  felt  marked  papers  may  give  rise  to  micro  defects  with  plastic  laminating  caused  by  incomplete  adhesion  of  the  film  to  the  substrate.  Good results with major processing operations such as: cutting, die-cutting, scoring, folding and glueing.

 

Fedrigoni Nettuno - Technical Sheet

You can download the technical sheet of the paper Fedrigoni Nettuno by clicking here

You may also like

Fedrigoni Nettuno Bianco Artico
€91,14
Fedrigoni Nettuno Blu Navy
€342,60
Fedrigoni Nettuno Carruba
€342,60
Fedrigoni Nettuno Nero
€297,91
Fedrigoni Nettuno Pesca
€91,14
Fedrigoni Nettuno Polvere
€278,03
Fedrigoni Nettuno Rosso Fuoco
€342,60
MEDIACOPY PREMIUM SAMPLE BOOK
€34,99
Carpetta Immagine
€55,00
Fedrigoni Nettuno Bianco Artico
€91,14
Fedrigoni Nettuno Blu Navy
€342,60
Fedrigoni Nettuno Carruba
€342,60
Fedrigoni Nettuno Nero
€297,91
Fedrigoni Nettuno Pesca
€91,14
Fedrigoni Nettuno Polvere
€278,03
Fedrigoni Nettuno Rosso Fuoco
€342,60
MEDIACOPY PREMIUM SAMPLE BOOK
€34,99
Carpetta Immagine
€55,00