FEDRIGONI ISPIRA NERO MISTERO
Environmentally-friendly ECF papers and boards FSC® certified.
The special soft touch finish on the surface allows a pleasent effect and high printing performances.
The 120 gsm is only one-side treated.
Colour: Nero Mistero
Available weights (g/m2): 120g, 150g, 250g, 360g
Available sizes: A4 (cm. 21x29,7), A3 (cm. 29,7x42), SRA3 (cm. 32x45)
Applications of Fedrigoni Ispira
Ispira papers and boards are ideal for packaging, commercial printing, inserts and brochures, wherever the need is to feel a special touch and to show a futuristic design.
Printing suggestions
Fedrigoni Ispira can be used without problems with the main printing systems: offset, blind embossing, hot foil stamping, thermography and screen printing. The use of digital technology, such as Xerography and ink-jet must be tested in advance to check effectiveness. The surface features low microporosity,and consequently the inks do not dry by absorption of the vehicle. Polymerisation in offset printing on sheets is achieved by oxidation; therefore oxidising inks need to be used. Excellent results have also been achieved with UV-dried inks. In screen printing, inks for plastic surfaces are recommended. We dissuade to use Fluorescent inks. In addition, it is essential to control all the printing process variables, especially the fountain solution, wich must be used in minimun dosages. Anti- setoff is useful, while low-pile delivery is required. Drying times depend on the ink load and to what extent the process variables are ensured, and can range from around 6÷8 hours up to over 12 hours.
Converting suggestions
Good results can be expected with all the main converting process: cutting, die cutting, scoring, folding, glueing and lining (substance 120 g/m2). Ispira’s special finish greatly reduces surface microporosity, making the paper inert to the normal hot melt glues used for making brochures. To overcome this characteristic, we recommend using a polyurethane (PUR) type of glue, which guarantees an excellent bond between the cover and the book block and a high degree of elasticity when opening the brochure. Varnishing and plastic laminating must be assessed in advance. The varnishing coated with an offset machine is almost fully absorbed and therefore does not improve gloss or protection, therefore we suggest to use acrylic or UV-dried varnishes. The special soft surface finish, may give rise to micro defects with plastic laminating caused by incomplete adhesion of the film to the substrate. We remind that only for the black shade “Mistero” when the surface is forcefully rubbed against another white surface, some black particles can be transferred on the white surface
Fedrigoni Ispira - Technical Sheet
You can download the technical sheet of the paper Fedrigoni Ispira by clicking here
